Triple insulated wire(0.2mm to 0.8mm)

We are counted among the trustworthy Importers & Suppliers of Triple Insulated Wires in the domestic market. The company has installed a physical facility for manufacturing these wires in several grades and ratings for furnishing variegated demands of the buyers. Further, our Triple Insulated Wires are obtainable in different packaging sizes. Our prices are also quite nominal.

The Benefits For Triple Insulated Wire are :

• Rolled Coil easily.
• High voltage insulation, could save insulating tape, insulating interlayer.
• Eliminates the need for the creepage margin.
• Superior wear resistance for high speed automatic Transformer winding line.
• Three layers of insulation protection, there is no pinhole phenomenon.
• Self Solderable So No Striping Requird.
• Size of The Transformer Can be Cut down to 30-50% Due To No Requirement of Interlayer Tapes.
• Save copper due to less number of turns required after eliminating insulating tape & interlayer.
• Intercourse Wear More Than 250 Times.
• Triple insulated wire Ranges From 0.16 TO 1.00 mm.

Features

• Consist of three layers of insulation. Completely isolate the primary winding from the secondary winding of transformers.
• Greatly reduce the size and weight of transformers.
• Greatly improve the eficiency of the transformers by reducing the distance between coils.
• Allow to wind directly on the top of enameled wires. Eliminate the interleaved insulation tapes, barriers and insulating sleeves.
• Solderable without the need of insulation pre-stripping.
• Can be fast coiled by using an Automatic Coiling Machine.
• Thermal Resistance Class B (130 C) and Class F (165 C) are available.
• Self-Bonding type has a self-bonding layer that covers the outer surface. The bobbin can be eliminated and the size and weight or transformers can be further reduced.
• Litz wire type has high frequency resistance that can sharply reduce the power losses caused by skin and proximity effect and is suitable for high frequency transformers.

The Advantages of Triple Insulated Wire are :

• Rolled coil easily.
• High voltage insulation, could save insulating tape, insulating interlayer.
• Superior wear resistance for high speed automatic Transformer winding line.
• Three layers of insulation protection, there is no pinhole phenomenon.
• Self Solderable So No Striping Required.
• Size Of The Transformer Can Be Cut down To 20-30% Due To No Requirement Of
• Interlayer Tapes

• Save copper due to less number of turns required after eliminating insulating tape &
• interlayer.
• Intercourse Wear More Than 250 Times

• Triple insulated wire comes in three different temperature gradient :
  
  • Class E to 120 C
  • Class B to 130 C
  • Class F to 155 C

• Triple insulted wire Ranges From 0.16 TO 1.0 mm.